Here is a new Harness for the plow lights made by Truck Lite. This is for the Special DRL lights. To tell if you have these light look at the plu there are 6 pins it has 6 actual wiries coming from the light. These will work on most of the newer trucks and use the headlight adapters to plug into the truck lights no splicing except the turn and park lights. The Meyer kit was part # 07033 Truck lite uses a similar kit # 80900 but they do not use the same plugs if you have the truck lite kit with hard plastic plugs you need the 80930 at this link. so you can not interchange them. On the top of your light they will say Meyer by Truck lite. All you are getting in this listing is the harness Orrignal Meyer made by Truck lite # 07036. This style has 6 pins and a 12 tab switch. Do not confuse these with the non DRL lights that use a 5 pin plug and 6 tab switch. These can be used on any brand plow. These do fit many of the newer trucks.

Here is the link to the truck lite installation instructions 80900

The orrignal Meyer instructions for light kit 07033

Here I also have Truck lite's orrignal build sheet for Meyer with color codes and all schematics